Positive Connection
The unique connector is made of high strength polyethylene that flexes with ease when building curved walls.
The connector grooves of the two units above ensure that the connector is aligned properly. The three CornerStone® Positive units are joined in a triangle, to a single geosynthetic wrapped connector providing excellent horizontal unit to unit alignment.
CornerStone® Positive’s gear shaped connector is wrapped with geosynthetics at 270 degrees and wedged into the grooves of the units above. This forms a 100% positive connection along the entire length of the reinforcement layer.
The CornerStone® Positive and friction connection may be used in the same wall providing the contractor savings in time
and money.
Units
STRAIGHT FACE
8″ Height x 18″ Width x 12″ Depth
(203 H x 457 W x 305 mm D)
Weight: 75 lbs (34 kgs)
Face Area = 1 sq. ft.
Download
RADIUS FACE
8″ Height x 17.325″ Width x 12″ Depth
(203 H x 440 W x 305 mm D)
Weight: 75 lbs (34 kgs)
Face Area = .96 sq. ft.
Download
RANDOM FACE
8″ Height x 18″ Width x 12″ Depth
(203 H x 457 W x 305 mm D)
Weight: 75 lbs (34 kgs)
Face Area = 1 sq. ft.
Download
ANTIQUE FACE
8″ Height x 17.325″ Width x 12″ Depth
(203 H x 440 W x 305 mm D)
Weight: 75 lbs (34 kgs)
Face Area = .96 sq. ft.
90 DEGREE CORNER
8″ Height x 18″ Width x 9″ Depth
(203 H x 457 W x 229 mm D)
Weight: 65 lbs (29 kgs)
CAP
4″ Height x 18″ Width x 12″ Depth
(102 H x 457 W x 305 mm D)
Weight: 65 lbs (29 kgs)
All dimensions vary between manufacturers. Verify with local producer for correct measurements